Inepro IP Card Reader, Technical Manual

Page: 32 / 46

27 - Inepro IP Reader (Konica Minolta)
These are the setting for the currently supported readers:
Wiegand:
Setting Description Value Description Bits
Facility
code
Setting 1
Card ID. Because of the applied
interface it is possible that different
card readers are connected with this
communication protocol. To be able
to differentiate the different card type
the card type can be entered here.
- - - -
Setting 2
Protocol Type. The different Wiegand
readers are able to read card with
different protocols. The IP reader
software will enable you to select one
of the protocols.
(Remark ”all types” in setting 0
means All types except 2 and 128-
255.)
0
All types
except value
2 and 128-
255
- -
1 H10301 26 8 bit
2 H10302 37 none
3 H10304 37 16 bit
4 H10306 34 16 bit
5 C1000 35 12 bit
8 ARAS 36 36 16 bit
128 NFP 37 16 bit
129 NFP1 36 15 bit
130 PAL 34 0 bit
131 PAH 27 0 bit
255 RAW -- 0 bit
Setting 3
Facility code. This is a part of the
data delivered by the Wiegand
protocol. If the value here is other
then '0', then the IP reader will check
if the code on the card is present. If
the value is '0' the facility code is not
checked.
- - - -
Data 1 Not applicable - - - -
Data 2 Not applicable - - - -
Note: The facility code is never send to the server.