Industrial Shields DALI 20, User Manual

Page: 13 / 43

Ref. 004001001200 Rev.3: 17-01-2021
12
Performance Specification:
Arduino Board ARDUINO LEONARDO
Control method Stored program method
I/O control method Combination of the cyclic scan and immediate refresh processing methods.
Programming language
Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform
composed of a programming
language. “similar to the C”.
http://arduino.cc/en/Tutorial/HomePage
Microcontroller ATmega32u4
Flash Memory 32KB of which 4KB are used by bootloader
Program capacity (SRAM) 2.5KB
EEPROM 1KB
Clock Speed 16MHz
Symbology
Table that includes all the symbology that is used in the serigraph of the Ardbox Analog HF+:
Symbol
Standard No. /
Standard Title
Standard
Reference No. /
Symbol Title
Symbol Meaning
IEC 60417 /
Graphical symbols
for use on
equipment
5031 / Direct
Current
Indicates that the equipment is
suitable for direct current only;
to identify relevant terminals
IEC 60417 /
Graphical symbols
for use on
equipment
5032 / Alternating
Current
Indicates that the equipment is
suitable for alternating current
only; to identify relevant
terminals
IEC 60417 /
Graphical symbols
for use on
equipment
5130 / Pulse
General
To identify the control by
which a pulse is started.
IEC 60417 /
Graphical symbols
for use on
equipment
5017 / Earth,
Ground
To identify an earth (ground)
terminal in cases where
neither the symbol 5018 nor
5019 is explicily required.
IEC 60417 /
Graphical symbols
for use on
equipment
5115 / SIgnal lamp
To identify the switch by
means of which the signal
lamp(s) is (are) switched on or
off.