Industrial Scientific DSX-L, Startup Manual

Page: 82 / 120

78
Yellow Circle with a Rex X The cylinder will expire within 30 days.
Red Circle with a White X The cylinder is expired.
Yellow Circle with an
exclamation point
The Gas In connection is disabled.
NOTE: If you hover your mouse pointer over the status icon on a Gas Inlet section, a tooltip
will appear that shows the meaning of the icon.
4.7. Adding Gas from Industrial Scientific
To add an ISC gas, follow the instructions below.
Step Instruction
1. From the Docking Station Properties page, click on the Gas Inlet link under the
Quick Links section for the gas inlet you need to configure.
2.
Click the Edit ( ) button at the top right corner of that Gas Inlet section, and then
select “ISC” from the Cylinder dropdown.
3. The cylinder configuration section appears.
4. Select an Expiration Date for the gas.
NOTE: You cannot enter an Expiration Date that is earlier than today’s date.
5. Click the radio button in the row matching the part number of the cylinder you are
connecting to this gas inlet. If the cylinder part number you need to select is not
immediately visible, you can search for it using the search box above.
6. Optionally enter a cylinder serial number. (This field may be left blank.) This field
is editable when the user is manually adding a cylinder (both for ISC and NON-ISC
cylinders). NOTE: Valid characters include any combination of alphanumeric
characters, dashes, and period, up to 30 characters in length. Invalid characters
include “%”, “&”, “<”, and “>”. Leading or trailing spaces will be trimmed from the
data entered in this field. Data entered in this field is saved to the Cylinder table in
the DSX-L database, but is NOT sent to iNet.
7. Click the Save button to save your changes to the gas inlet.