Industrial Scientific DSX-L, Startup Manual

Page: 115 / 120

111
You can add the following types of Special Events:
•
Bump Test
•
Bump Test (Tango)
•
Diagnostics
•
Calibration
•
Alarms
•
Datalog Download
•
Manual Operations Download
NOTE: The “Bump Test (Tango)” special event is system created. It applies to any Tango
instrument that is in single-sensor mode or has two installed sensors and one is in calibration fail.
When any Tango TX1 instrument is in either state, DSS will override any other bump test event
for the unit.
To add a Special Event for an instrument, follow the instructions listed below.
Step Instruction
1. Log in to the DSSAC application.
2. Expand the Events option in the navigation pane, if necessary.
3. Expand the Instrument option that is underneath Events, if necessary.
4. Click on Special. Any instrument Special Events that have been previously added
appear in the contents page. The contents page displays the Event Type, the current
scheduled Interval, whether or not it is disabled, the event Name, and the Event
Owner.
5. Click on the Add Event dropdown menu button at the top right of the Special Events
List page.
NOTE: Only the dssuser user can edit special events. However, if the dssuser assigns another
user (requires administrator role) as the owner of the special event, they too can edit. Any
administrator can view the special event.
Step Instruction
6. A dropdown list of Special Events appears.
7. Click on the Event Type you wish to add.