PB-INspektor
®
Web Interface
Page 21
7.1.1 Event Overview (Network Overview)
The Events box displays the following three time periods:
x
Last Minute
x
Last Period (user-definable time frame)
x
History (since last power-up)
For each time period, the PROFIBUS INspektor indicates the total count of all
error events, the bus cycle times, and the time of the last SNMP request (only
with SNMP software option).
In the table on the right, you will find the number of alarms (click to open the
alarm list) as well as the baud rate and the INspektor's internal temperature
and time of day.
7.1.2 Device Overview
Here, all the PROFIBUS devices detected by the INspektor are sorted by
address and displayed in a matrix. The most critical device states that
occurred during the selected time period are shown in color.
When you are using the default settings, the matrix indicates the user-defined
designations of the devices and their locations.
In the selection box, you can choose under “Events” for which bus device you
want to display the error events. Alternatively, hover the mouse over a matrix
field to show a table of all the error events that have occurred for this device.
Web Interface
Manual
Page 22
7.2 Alarm List
The Alarm List displays the last 100 alarms with the date and time of their
occurrence, the respective error event, the device address concerned, and the
threshold value that was exceeded.
7.3 Snapshots
Click Snapshots in the navigation box on the left to view the last 8 snapshots
that were captured according to the Alarms/Snapshots settings. A snapshot is
a trace log containing max. 500 frames captured from the entire bus communi-
cation; the trace starts shortly before and ends shortly after an error event.
You can download snapshots to a notebook or PC by clicking the disk icon in
the last column.
7.4 System Information
Here you find general information about system settings to PB-INspektor
®
as
well as its system state.
These contain:
x
Internal device
status
x
Network
settings and statistics
x
Running time of the
system
; CPU and memory utilization
x
Firmware and hardware
versions
, serial numbers, license
x
Usage log (
log file
)
Summary of Contents for PB-INspektor
