24
User Guide - v14
Network
Use this page to configure the network settings.
•
NVR Name
— Enter a name to identify the NVR device.
•
Compact NVR-AS 4000 Location
— Enter a location to identify the device.
•
Use DHCP
— Check this to enable DHCP for the NVR device. When this is enabled,
the IP address, subnet mask, gateway, and name servers are obtained from the
DHCP server on the network. The options for these items are grayed out.
After switching to DHCP, you need to specify the new IP address of the network device in
the web browser. Query the DHCP server to find the assigned IP address, then use this IP
address in the web browser to navigate to the device.
The NVR device chooses the first two DNS servers that the DHCP server specifies.
If at least one NTP server is specified by the DHCP server then the NVR device will
attempt to synchronize with these NTP servers. The Date and Time page will not list
these servers and additional NTP servers can still be manually added.
If the NVR device fails to receive any configuration settings from a DHCP server on the
network, it will not be accessible on the network and you will have to use a keyboard and
monitor to set a static IP address.
►
For more information,
see "Initial configuration" on page 13
.
•
IP Address
— Enter the unit’s IP address.
•
Subnet Mask
— Enter the unit’s IP network subnet mask.
•
Gateway
— Appropriate default gateway for remote network access: this is only
required if the unit is to communicate with devices on a different subnet.
•
Broadcast Address
— This value is read-only.
•
Preferred/Alternate Name Server Address
— The IP address of the DNS server
used to convert network names into numerical IP addresses. You only need to enter a
name server(s) if you need to specify the SMTP Server Address or NTP Server
Addresses as a name and not as an IP address.
The above options are not available for editing if DHCP is enabled.
Date & Time
Use this page to configure the Date and Time settings for the NVR device.
•
NTP Servers
- This is a list of up to five NTP Servers that the NVR device will
synchronize with.
Servers can be specified as IP addresses or resolvable hostnames, if at least one
name server has been specified.
Add new servers by entering the server address in the text field and click
Add
.
Remove servers by highlighting them in the list and click
Remove
.
Changes are applied when you click
Submit
.
•
Timezone
- Select the timezone for the NVR device from the list.
•
Master Time Server
– Check this option if the NVR-AS device is expected to serve
as a master time source on a local area network when the configured NTP servers are
not available.
6 Configuration
Compact NVR-AS 4000
Summary of Contents for Compact NVR-AS 4000
