IndigoVision Compact NVR-AS 4000, User Manual

Page: 15 / 38

User Guide - v14 15
• No parity
• 1 stop bit
• Flow Control: None
3. Connect to the device and press Enter .
You should see the following prompt:
IndigoVision Compact NVR-AS 4000 [standaloneNVR]
login:
4. Log in to the device using the username "
config
" and password "
config
".
The device prompts you to enter the new configuration values.
5. At each prompt, press Enter to accept the current value.
• DHCP - Enter
Y
or
N
to chose between a DHCP or static IP configuration.
• IP Address — Enter the IP address for the unit’s network connection.
• Subnet Mask — Enter the IP network subnet mask for the unit's network
connection.
• Gateway — Appropriate default gateway for remote network access: this is only
required if the unit is to communicate with devices on a different subnet.
• Preferred/Alternate Name Server Address — Enter the IP address of the DNS
server used to convert network names into numerical IP addresses. You only need
to enter a name servers if you wish to specify NTP or SMTP server addresses as
names and not as IP addresses.
• NVR name — Enter a name to describe the unit.
• NVR location — Enter a name to describe the location of the unit.
• Reset network security — Enter
Y
to reset all passwords used to access device,
disable IP access restrictions, and reset the device to HTTP use only by deleting
any HTTPS certificate or certificate request.
You are now ready to attach the device to the network.
Configure the License Server
To complete the NVR-AS setup and allow it to record, you must configure the Compact NVR-
AS 4000 to use an IndigoVision License Server. You can do this by using the device web
configuration pages.
► For more information, see "License" on page 30
Compact NVR-AS 4000 3 Getting Started