Indian Motorcycle SCOUT BOBBER 2021, Owner'S Manual

Page: 98 / 162

FFRROONNTT W WHHEEEELL IINNSSTTAALLLLAATTIIOONN
If the front wheel is removed for any reason, it must be reinstalled
in the correct rotating direction.
Clean all wheel components before installation. Apply a light coat
of all-purpose grease to the axle and both spacers.
q
Right Fork Tube
w
Left Fork Tube
e
Axle Bolt 52 ft-lbs. (70 Nm)
r
Pinch Bolt 18–19 ft-lbs. (24.4–25.7 Nm)
t
Wheel Spacers
TTIIRREESS
WARNING
Operating the motorcycle with incorrect tires, incorrect tire
pressure or excessively worn tires could cause loss of control or
accident. Underinflation can cause a tire to overheat and result in
a tire failure. Only use tires approved by INDIAN MOTORCYCLE
for the model of the motorcycle. See your dealer. Use of
unapproved or an improperly mixed front and rear tire can result
in decreased handling performance and stability, potentially
leading to reduced control of the motorcycle. Always maintain
proper tire pressure as recommended in the rider’s manual and
on safety labels.
TTIIRREE RREEPPLLAACCEEM MEENNTT
Tires, rims, innertubes and air valves must be correctly matched to
wheel rims. Use only the proper size tires specified with the same
or higher load ratings. INDIAN MOTORCYCLE-recommended tires
provide proper clearance between fenders, swingarm, drive belts
and other components. See the Specifications section for details.
On models equipped with innertubes, innertubes MUST be
replaced with new innertubes when tires are replaced. Use only
the proper size innertubes.
WARNING
Mismatched tires, rims and air valves may result in damage to the
tire bead during mounting or may allow the tire to slip off the rim,
possibly resulting in tire failure.
96
MAINTENANCE