Indian Motorcycle SCOUT BOBBER 2021, Owner'S Manual

Page: 37 / 162

1. If the error codes are not displayed, use the right-hand trigger
switch to toggle until “Ck ENG” displays on the main line of the
display.
2. Press and hold the right-hand trigger switch to enter the
diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock
and odometer displays.
4. See an authorized dealer for code details and diagnosis.
q
Error Code Number (0–9)
w
Suspect Parameter Number (SPN)
e
Failure Mode Indicator (FMI)
DDIIAAGGNNOOSSTTIICC FFUUNNCCTTIIOONNAALLIITTYY
Certain conditions will cause the battery indicator to illuminate
and an error message to display in the screen. If this occurs,
please see your authorized dealer.
MESSAGE LOCATION INDICATES
LO
DC Voltage
Screen
Voltage remains below 11.0 volts for
more than 10 seconds
OV
DC Voltage
Screen
Voltage remains above 15.0 volts for
more than 10 seconds
ERROR All
Checksum error (gauge malfunction)
OOVVEERR TTEEM MPPEERRAATTUURREE DDIISSPPLLAAYY AANNDD W WAARRNNIINNGG
IINNDDIICCAATTOORR
If the engine coolant temperature approaches unsafe operating
conditions while the engine is running, the engine overheat
indicator will illuminate and the current engine coolant
temperature will display on the MFD. Stop the engine as soon as
safely possible. Check the coolant level. Check the radiator for
debris. Check cooling fan operation. If the warning continues to
display after restarting the engine, stop the engine immediately
35
FEATURES AND CONTROLS