8
Transportation, Installation, Commissioning
LL1602.10043 - 04.08.2014
ABC
PREPARATIONS
Space requirements
Make sure to provide for the following:
– Sufficient clear space around the machine.
– Sufficient moving space for the operator.
– Sufficient space for maintenance and repair works.
– It must be possible to open all machine doors completely.
– Floor area must be provided for blanks- and workpiece palettes, workpiece con-
tainer, chip pan, tool trolley etc.
See the machine installation diagram in the chapter "Working Data" for determining
the space requirements.
For attachments such as bar feeders, bar loading magazines etc., see separate
installation diagrams in the chapter "Working Data".
Foundations
Special foundations are not necessary as long as the floor quality complies with the
usual building regulations according to the weight of the machine.
Within the machine standing area there must not be expansion joints.
The machine may be anchored. For anchoring holes refer to the machine installa-
tion diagram in the chapter "Working Data".
Bar supports, bar feeders and bar loading magazines must always be anchored.
(For instructions see the appropriate operating instructions and the machine installa-
tion diagram in the chapter "Working Data").
When using a bar feed or a bar loading magazine
INDEX
recommends anchoring
the machine as well.
Environmental Conditions
See Environmental Conditions in the document “Safety instructions”
If the data at the installation site deviate from the values
above, please, contact INDEX or an INDEX agency.
