Indesit LFT 228 A/HA, Service Manual

Page: 5 / 25

Service Manual
Manual LFT 228-320 - 321
Edition
2007.10.15
Language
English
5
2.3: GENERAL TECHNICAL DATA
TECHNICAL DATA
EU UK
Capacity 12 Standard Covers 12 Standard Covers
Dimensions
Width 59,5 cm 59,5 cm
Height 82 cm 82 cm
Depth 57 cm 57 cm
Water Supply Connections
Maximum pressure 10 bars 10 bars
Minimum pressure 0,5 bars 0,5 bars
Electric Connections
Power strength 220/230 Volt/ 50 Hz 220/240 Volt 50 Hz
Minimum pressure 1900 Watts 1900 Watts
CHAPTER 3: INSTALLATION OF PRODUCT
Select the site where the dishwasher is to be set up; it can also be set up having the back or side-panels against other furniture or
against the wall.Thedishwasher is supplied with charging-and-disfill up-pipes, that can be adjusted to the left or to the right to ease
the setting up.
HEIGHT ADJUSTMENT
Introduce the dishwasher in the space and adjust the height by means of the central screw for the rear part and the fore-feet for
the front part of the machine. By means of a screw-driver, turn the screw clockwise or anti clockwise in order to increase or reduce
the height.
LEVELLING
Once the dishwasher has been positioned, adjust the feet by either fastening or unfastening them according to the height
required, and proceed to level them out so that th machine is well fixed to the floor. Ensure that its inclination angle does not
exceed more than 2 degrees. This will ensure a correct functioning of the product.
COLD-WATER SUPPLY CONNECTION
Connect the incoming cold-water pipe. Should the pipes be brand new or not have been used for a certain period of time, it is
recommended to allow the water to flow through till it comes out clean. Such precautionary-measures will prevent probable
water-blockage and damage to the dishwasher.