Service Manual
Manual LFT 228-320 - 321
Edition
2007.10.15
Language
English
21
7.3 PC, PALM, SMART READER
Electronic dishwasher models EOS have been envisaged with a Main-board DEA 601; which has been evolved from the DEA
600 used on Seven Digit machines.
Two types are available: one used on LVS with synchro-motors and another on machines with BLDC motors.
In Built-In dishwashers, the Main Board is accessible by removing the hooks fastening the front-panel (under the machine) and
opening it.
The Main-Board is to be found at the back of the panel and is fastened by a clicking-device. In order to remove it, it issufficient to
slightly press the board on the side of the connectors.
How is the Main-board administered?
The Main-board comes unprogrammed, consequently, those markets that donot have at their disposal Palms or Pcs, a Smart
Card, specific to the model, as well as the Main-board will be provided to the technicians on request to the spare-part
warehouses.
It ill not be deemed necessary to use Eeprom. The Setting-File will be registered directly onto the micro-processor of the main-
board. The main-board will need to be fitted, strictly adhering to safety-regulations, and then only can it be programmed. In each
and every case it is highly recommended to consult relating literature on use on programming-device which is being used.
Important:
On having completed work on the Main-board, the front door panel must be well closed; careful attention must be paid
that the Main-board wires donot get caught in the mechanical working of the floating-ball, which could block it.