background image

Service Manual

Manual LFT 228-320 - 321

Edition

2007.10.15

Language

English

7

Eliminate any residuals on the discharge-syphon and ensure that the sealing-cap has been removed. The flexible hose must be 
directed and placed at a minimum height of 800mm  (3 ½ “)

NB:  

Ensure that the diameter of the water-basin discharge-hose measure at least 32mm.

1.

Uncoil the extreme end of the flexible GREY hose from the back of the machine.

2.

Position the flexible GREY discharge-hose on the supporting-elbow as shown above.

3.

Set up a discharge system under the wash-basin, cut away the membrane, the obstruction or cap.

4.

Secure the flexibledischarge-hose to the discharge system under water-basin.

INSTRUCTIONS ON INSTALLATION OF INTEGRATED DISHWASHER

Important

 The dishwasher must be well-secured to the built-in top in order to avoid it tilting over while extracting full dish-racks.

Adjusting posterior legs

Fit the dishwasher in the space and adjust the height by working on the screw placed on the front part at theback and on the fore-
legs. By using a screwdriver, turn the screw in a clockwise direction in order to lift the dishwasher and in an anti-clockwise 
direction to lower it.

Tape no-condensation

Some models have been provided with a transparent condensation-proof tape. It must be secured onto the lower part of the 
wooden work-surface, in order to protect it against condensation- formation.

Should it not be envisaged on the model-type, it may be ordered as a spare-part from authorised dealers.

Summary of Contents for LFT 228 A/HA


























Reviews: