13
GB
Salt ......
Salt
The hardness of the water varies from place to place. If
hard water is used in the dishwasher, deposits will form on
the dishes and utensils.
The appliance is equipped with a special softener that uses
a salt specifically designed to eliminate lime and minerals
from the water.
Loading the Salt into the Softener
Always use salt intended for use with dishwashers.
The salt container is
located beneath the
lower rack and should be
filled as follows:
1. Remove the lower rack
and then unscrew and
remove the cap from the
salt container;
2. If you are filling the
container for the first time,
fill it with water;
3. Place the end of the
funnel (supplied) into the
hole and introduce about 2 kg of salt. It is normal for a
small amount of water to come out of the salt container.
4. Carefully screw the cap back on.
The salt container should be filled up when the low salt
indicator light "
E
" flashes. Once you have loaded the salt for
the first time, it is normal that the low salt indicator light
stays on or flashes for about 5 consecutive cycles.
Warning:
To prevent rust from forming, we advise you to
load the salt
before
starting a wash cycle.
Summary of Contents for DVG 621
Page 3: ......