Big Buck Hunter II Page 22
Version 03/04
INSTRUCTIONS FOR REGISTERING YOUR
MACHINE VIA ITNet:
1. Highlight GAME AND LOCATION REGISTRATION
and press the START button.
2. Insert your Operator ID Card into the card reader.
3. Once you have read the introduction screen press
the START button to continue.
4. Enter the LOCATION NAME (Up to 20 characters
long)
5. Enter the LOCATION STREET ADDRESS (Up to
40 characters long)
6. Enter the LOCATION CITY (Up to 20 characters
long)
7. Enter the LOCATION STATE (Initials Only)
8. Enter the LOCATION ZIP CODE (5 digits)
9. Enter the LOCATION PHONE NUMBER (incl. Area
Code) of the phone line the machine is plugged into
(10 digits).
It is VERY IMPORTANT that this
phone number is correct.
10. Do you need to dial a number for an outside line? If
YES go to #11, if NO go to #12.
11. Enter the NUMBER TO DIAL FOR AN OUTSIDE
LINE (Leave blank for nothing)
12. Do you need a delay to wait for an outside line? If
YES go to #13, if NO go to #14.
13. Enter the NUMBER OF SECONDS TO WAIT FOR
OUTSIDE LINE (Can leave blank if no delay is
needed. The default is 2.)
14. Is your phone line a rotary/pulse (old style) line? If
YES, go to #15. If NO go to VERIFICATION
SCREEN section.
15. Press the START button on YES for YOU HAVE
CHOSEN ROTARY.
VERIFICATION SCREEN:
At this point you will come to a screen that shows the
information you entered and asks you to verify it. If
anything is incorrect, this is your chance to go back and
correct it. If everything is correct press the START
button. This screen then tells you that you have
completed entering in all the information and that the
data must be transferred to ITNet in order to be
successfully registered. Make sure the machine is
plugged into a phone line.
CONTINUING ON WITH THE REGISTRATION
PROCESS:
If you want to proceed with the registration process
activate YES to exit. The game will then proceed to
make a call to ITNet. If the call fails your data will be
saved, as long as power remains to the game. If there
are no power ups or resets, the machine will continue to
try and send the data on its next call until it is
successful. If your information did not go through the
first time and you later get a successful call, you can
check the registration status of your machine by going
to the menu selection
CURRENT REGISTRATION
STATUS
. If the call is successful for the first time, a
registration confirmation screen appears, confirming
that the machine is now registered to ITNet. If the call
is successful but there is a problem, a failure message
is displayed. You may need to contact Incredible
Technologies’ Service Department.
CANCELING THE REGISTRATION PROCESS:
Any data you entered will be saved and will reappear
(until you power the game off) if you later choose to
register or change your information. Your game will not
have access to League or Tournament Play until you
have registered your machine.
