Version 03/04
Big Buck Hunter II Page 21
ITN
ET
M
ENU
This menu is designed for the operator to interface with
ITNet at the game itself. Instant registration, quick
location information changes, and changing dialing
functions are available from this menu.
NOTE:
For GAME AND LOCATION REGISTRATION, CHANGE
LOCATION INFORMATION, and GAME AND LOCATION
UNREGISTRATION it is recommended that you make sure the
machine is correctly plugged into a phone line, as a successful
ITNet call must be made for these menus to take effect.
CURRENT REGISTRATION STATUS
displays the
ITNet information the machine is currently operating
under. This will display the most current entered
information, including the board serial number, your
operator ID number, the location name, address, and
phone number, and the modem dialing instructions.
This screen displays the current ITNet registration
status. If the game has been successfully registered,
the messages will read: “This machine is registered.” If
the game has never been registered, or has been
unsuccessfully registered, the message will read: “This
machine is not registered.”
NOTE:
The new Big Buck Hunter II PCB has its own Serial number.
This important number can be found on the new PCB or at the
top right corner of the screen in test mode.
NOTE:
Use your Operator ID card to register your game to your ITNet
account. If you do not have your cards, please call us at 847-
870-7027, x141 to order them. You can register your game in
the mean time by faxing the completed Game Registration
Form found in the Appendix A to IT for processing.
If you are updating location data on a registered
machine, this screen will show the updated information
after a successful call to ITNet. Note: If the machine is
turned off before a call has been made, you will lose the
new information until a successful call has been
completed.
If you choose to register your machine via the Game
Initialization form, send or fax it to Incredible
Technologies. ITNet will try to process your paperwork
within 3 to 5 business days. Make sure your machine
makes a successful call to ITNet then the correct
information will appear on this screen.
The following menus regarding machine registration
and unregistration are for US machines only.
GAME AND LOCATION REGISTRATION
is used to tie
the game to the operator and its physical location. This
is necessary for access to online ITNet features. This
menu takes the place of the ITNet Registration Form.
However you will still need to set up a debit account
and sign an operator agreement, if you are not already
a registered operator with ITS/ITNet. This menu is
automatically displayed any time an unregistered
machine is turned on. The menu will time out, or can
be bypassed by pressing any button.
NOTE:
Make sure you have your machine plugged into a phone line
and your operator card ready. You will need to enter data into
each field unless instructions state otherwise. Please
abbreviate where necessary and read your information first
before pressing YES on the field verification screens. Pressing
the Start button will cancel this process on any screen.
