background image

Version 03/04

  Big Buck Hunter II  Page 19 

Your cabinet is also equipped with volume 
increase/decrease push buttons located inside the coin 
door.  These buttons will adjust the current mode that 
the game is in.  For example, if you are in the attract 
mode, the volume buttons will only affect the volume in 
the attract mode.  If you are in the game, the volume 
buttons will only affect the volume in the game. 

ATTRACT MODE SOUNDS 

This menu is used to adjust the sounds that are heard 
while no one is playing the game. 

 

ATTRACT MODE SOUNDS - OFF

 will not allow any 

sounds to be played during the attract mode. 

ATTRACT MODE SOUNDS - ON OCCASIONALLY 

plays sounds about every ten to twelve times the attract 
mode is repeated. This is the default. 

ATTRACT MODE SOUNDS - ON ALWAYS 

will play 

sounds during every attract cycle. 

VIOLENCE 

Big Buck Hunter II allows you to adjust the violence 
settings on the game, depending on the location. 

 

NORMAL

 violence settings displays some blood as the 

bucks are shot.  This is the default setting. 

NO BLOOD removes the graphic elements, but the 
references to shots and gunfire remain. 

TAGGING ONLY removes all video and audio 
references to killing or blood, and replaces them with 
references to humane tagging. 

EMAIL REQUEST MENU 

Your Big Buck Hunter II game will ask players if they 
wish to join the ITNet Email Club, where they will 
receive periodic information on ITS tournaments, 
special events and other exciting news designed to 
keep them interested and playing your games.  You can 
turn this feature off by selecting OFF from this menu. 

 

COIN PAGE PROMPT TEXT 

If your Big Buck Hunter II is placed in a location that 
uses debit cards or special card pricing, you can 
change the request for more money at the start of a 
game.  Select INSERT COINS for the traditional 
message, or SWIPE CARD for the message to request 
a card to start the game. 

 

Summary of Contents for Play Mechanix Big Buck Hunter II







































Reviews: