Incredible Technologies LoonyTIX Install Manual Download

Page: 28 / 33

Version 10/14

Page 7

Operator Menus

TESTS MENU

To ensure that the game has been setup properly and functions correctly, diagnostic test are available:

audio/video tests, meter tests, and game and system software tests.
This screen displays the following Test Menus:

TICKET DISPENSER TESTS

Tickets Owed

Tracks tickets that have not dispensed due

to a malfunction with the ticket dispenser

Dispense One Ticket

Ticket dispenser dispenses one ticket

Dispense Five Tickets

Ticket dispenser dispenses five tickets

Ticket Dispenser State

If the ticket dispenser is ready to use, the

screen reads

Idle

. The other states are

Dispensing

Jammed

and

Empty

Note:

If the ticket dispenser is jammed, open the ticket bay and check for a jammed ticket. Re-feed the tickets

through the dispenser. The ticket dispenser should automatically reset but if not, touch

Reset Ticket

Dispenser

Ticket Sensor Status

If the ticket dispenser is properly setup, the Ticket Sensor Status reads

Ticket Sensed

. If there is an error it reads

No Ticket Sensed

Note:

If the machine is in error and No Ticket Sensed appears, check the ticket dispenser to make sure the

tickets are feeding correctly.

Reset Ticket Dispenser

Resets the ticket dispenser to default condition

MECHANICAL METER TESTS

Increment Coin Meter

Increment the coin meter one tick

Increment Ticket Meter

Increment the ticket meter one tick

To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255

Summary of Contents for LoonyTIX

































Search results

Summary of Contents for LoonyTIX

Reviews:

Related manuals for LoonyTIX

Brands by name

Popular brands

Incredible Technologies LoonyTIX, Install Manual

Search results

Summary of Contents for LoonyTIX

Reviews:

Related manuals for LoonyTIX

Brands by name

Popular brands