Loony TIX
TM
8
|
P a g e
©2014 Incredible Technologies, Inc. All Rights Reserved. Non-IT trademarks are the properties of their owners and used for illustration only.
Unauthorized duplication or disclosure may violate applicable laws or agreements. Loony Tix~Install 11.21.14
Cabinet Setup
Mounting Marquee Topper
Materials required:
(2) 8-32 x 3/8” Hex Nuts
(2) 8-32 x 3/8” Hex Screws
11-32” Nut Driver or Phillips Head Screwdriver
Do
NOT
attempt to mount the HDTV Monitor before mounting the Marquee Topper.
Make sure the cabinet is unplugged and the power is OFF.
Mounting Marquee Topper Procedure
1
Remove the packing paper and the clear acrylic artwork from the front of the
Marquee Topper, careful not to pull out any of the wires connected to the LED
lights.
2
With a minimum of two people lift the Marquee Topper into position on top of the
cabinet and carefully slide it onto the pegs protruding from the Marquee Mounting
Brace. See image below.
3
Attach one 8-32 x 3/8” Hex Nut to each peg and turn until tightened.
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
