Golden Tee
®
Home Edition
Page 24
© Copyright 2020 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved. PN 815000356RB
CONFIGURE ETHERNET SETTINGS
Depending on your system setup, you may need to
manually set specific settings for Ethernet to work. Use this
menu to enter these settings.
Enable DHCP
Set this to Yes if your service provider or your router
hardware has DHCP enabled. DHCP automatically sets
the IP, Gateway and Net Mask.
If you edit the IP below to anything other than 0.0.0.0, it
automatically changes Enable DHCP to No.
If No DHCP, Static IP
Set this to the IP that your service provider issued, or an IP
from your router’s subnet that is not already being used.
If the IP is set to 0.0.0.0, it automatically changes Enable
DHCP to Yes.
Gateway
Set this to the Gateway that your service provider issued, or the IP address of your router. Example: 192.168.1.1
Net Mask
Set this to the Net Mask that your service provider issued, or if you are using a router it is typically 255.255.255.0.
Example: 255.255.255.0
Test Ethernet
Selecting this will initiate a network connection using your entered network settings for DHCP or Static IP,
Gateway and Net Mask. If the connection succeeds, a latency time check is also performed. Results are
displayed at the end of the tests. It is a good idea to perform this test anytime you make changes to any of these
settings to make sure everything works.
Back
Select this to return to the
Communication Settings
menu.
CONNECTION TESTS
Use this section to test the connection to ITNet.
Check Latency Time
This test will measure the time it takes for your game to
communicate with ITNet. If successful, the delay time in
seconds will be displayed.
Force Call to ITNet
This test will initiate a connection with the ITNet system
and give a result status.
Back
Select this to return to the
ITNet Settings
menu.
Summary of Contents for Golden Tee Home Edition
Page 1: ...Rev 10 2020 ...
