2.2 Driver Installation
Please make sure the hardware (card) is installed before
installing the driver.
If you’re unable to install the drivers from the CD, please
go to the following address to download the driver that
corresponds to your product model:
http://www.inateck.com/support
1. Insert the provided CD into your disk drive.
2. Run the “Autorun.exe” file, click “Drivers”, and select
the appropriate driver version.
4
connector (golden portion) with the selected PCIe slot
on the motherboard. Push the card down firmly.
5. Use the included screw (or the screw from the slot
bracket) to secure the card to the case.
6. Replace the computer cover/side panel and reconnect
the power cord.
