inada HCP-G900, Operating Instructions Manual

Page: 13 / 52

10
[BEFORE USE]
Caution
●
Before each use, check for holes or tears in the active area covering. Also, check the other parts for tearing. Stop using
the chair immediately if you fi nd even the smallest tear. Unplug the chair and contact the vendor (details on back cover)
for assistance. Never use the product with the active area covering removed or with holes or tears in the covering,
because doing so is extremely dangerous.
Checking the Seat Cover
Check there are no tears in the covers of all parts.
Main Power Connection
① First, plug the power
cord connector into the
cord connector located at
the front right of the chair.
Then, plug the other end
into the wall outlet.
② Set the main power
switch located at the front
right of the chair to ON.
*If the main power switch is turned ON while the rollers are stopped partway, they will automatically return to the starting position (leg section) and then stop.
Warning
● Do not use with any type of transformer device.
→ May result in damage to the chair or electric shock.
Caution
● Before plugging the power cord into the wall outlet, make sure that the main power switch is set to OFF.
● Make sure that the plug on the power cord is inserted fully into the wall outlet.
● Before using the chair for the fi rst time, turn on all the switches in order as indicated in this Operating Manual to check
that the chair is operating properly.
① Remove the Velcro from the side of the pads.
(Left and right)
② Turn over the pads from under the feet.
③ Lift the pads.
④ Check there is no
damage to the active
area cover.
How to Use Cushions
When using the massage function, remove the provided cushions. If you think the stimulation is too intense, attach the
cushions.