7
8
COMPONENTS & DESCRIPTION
COMPONENTS & DESCRIPTION
COMPONENTS & DESCRIPTION
REMOTE CONTROL
POWER Button
Switches the remote control power ON and OFF.
If pressed during operation, the chair will stop
and the rollers will return to their original position.
STOP Button
Use this button in case of emergency or if
there is some malfunction during operation.
The chair movement stops immediately.
Shoulder Position Adjustment Buttons
Use the [ ] and [ ] buttons to adjust roller
positions immediately after Shiatsu Points
have been located.
Registered Voice Call Buttons
To recall registered voice keywords (For regis-
tration method, see pages 25 and 26).
Voice Registration Button
Records and registers voice (For registration
method, see pages 25 and 26).
Remote Control Display
Displays information about the current mas-
sage action, remaining time, massage speed,
and intensity (See next page).
Air Pressure Adjustment Buttons
Adjusts the air pressure intensity in the health-
care programs or manual selection mode.
Voice Control ON/OFF Button
Turns voice control on/off.
Reclining Buttons
Use the [UP] and [DOWN] buttons to adjust
the angle of the seat back.
Footrest Buttons
Use the [UP] and [DOWN] buttons to adjust
the angle of the footrest.
Foot Slide Buttons
Use the [EXTEND] and [SHORTEN] buttons
to adjust the length of the foot slide.
Healthcare Program Buttons
Choose from among 5 different pre-set mas-
sage programs.
Intensity Adjustment Buttons
Rollers are pushed out with the [HIGH] but-
ton pressed for higher intensity. The [LOW]
button withdraws rollers for lower intensity.
Massage Cancel Buttons
Omits a section during operation of a health-
care program.
Vibration Cancel Buttons
Use to cancel vibration during operation of a
healthcare program.
Volume Button
Panel
See next page for
illustration of open panel.
Speaker
Do not spill water and/or other liquids on the remote control.
Do not handle the remote control with wet hands.
Do not sit or step on the remote control. Do not drop the remote control. Do not pull the remote control cord forcibly.
Do not use pointed or hard objects to push the buttons or display on the remote control.
→
May result in damage to the remote control.
Warning
REMOTE CONTROL DISPLAY
REMOTE CONTROL / INNER CONTROL PANEL
Displays information about the current massage, time remaining, and speed and intensity settings, using
both text and symbols. The text and symbols run from left to right on the display.
Example: During activation of Shiatsu Point Locator sensors, the following text is displayed:
"Locating Shiatsu Points..."
Remote Control Display
Reclining Buttons
Footrest Buttons
Foot Slide Buttons
Width Adjustment Buttons
Adjust the width between the 2 rollers. To
narrow, press the [ ] button, and to
spread further apart, press the [ ]button.
The [ ] button is for medium.
Shoulder Kneading Button
Air Massage Buttons
Select from among [ARM], [SEAT], [CALF]
and [FOOT].
* Air massage pressure can be adjusted
with the air pressure adjustment buttons,
from among 3 levels: high, middle, and
low.
UP/DOWN Adjustment Buttons
Adjust the roller position with [UP] and
[DOWN] buttons.
Speed Adjustment Buttons
Adjust the operation speed of Kneading,
Tapping 1, or Kneading & Tapping.
Vibration Buttons
Offer 2 types: High and Low.
Manual Selection Mode Buttons
Select from among Kneading, Human Touch, Tapping, Tapping/Kneading, Rhythm SHIATSU, Techni-
que SHIATSU, Partial ROLLER, and Full ROLLER.
Panel
