11
①
Place the remote control pocket on the
armrest (right).
②
There is Velcro for installing the remote control pocket on the
inside of the armrest (right). Wrap the remote control pocket
around the armrest (right) to install it.
BEFORE USE
Checking the Seat Cover
Before using the chair, check the seat cover for tearing with the following procedure.
①
Peel open the Velcro at the top.
②
Fold the back pad forward, and check by touching with
your hands that the chair fabric is not damaged.
Caution
●
Be sure to check for tearing on the chair before every use, as shown in the illustration. Also, check the other parts for
tearing. Unplug the chair and contact the “Repair Service Center“ (see back page) for assistance. Never use the chair
with the chair covering removed or with holes or tears in the covering, because doing so is extremely dangerous.
How to Install the Remote Control Pocket
Attach the supplied remote control pocket to the arm rest (right) as shown in the diagram below.
Velcro
Remote control pocket
Armrest (right)
Place on the
armrest (right)
Wrap around the
armrest to install
Insert the remote control
into the pocket for use.
[BEFORE USE]
Back Pad
Chair Covering
Velcro
Summary of Contents for Flex 3s HCP-S373A
Page 31: ......
