9
③
Remove the screws and washers. (3 locations on each side, shown by the dotted line circles)
①
②
③
●
Installation precautions
Install by using the T-shaped wrench in the direction shown in the diagram. (Ensure that the washer direction is
correct.)
If the screw is installed at an angle, the threads may be crushed.
Make sure it is not at an angle.
④
Remove the armrest in the order of a, then b.
a
b
●
Installation precautions
Pass the air hose and harness through the rectangular hole on the armrest. (3 on each side)
*Be careful not to use the wrong hole.
Align the shaft on the chair with the hole on the armrest, and insert the armrest.
* Make sure that the operating mechanism cable does not pass between the chair and the armrest.
The operating mechanism cable may break.
*Make sure that the fabric on the inner side of the armrest is not caught by the shaft.
BEFORE USE
Cover
[BEFORE USE]
Fabric
Washer
(Concave Surface)
Screw
Air Hose, Harness
Rectangular Hole
Summary of Contents for Flex 3s HCP-S373A
Page 31: ......