Width Adjustment
During Tapping 1, Tapping 2, Shiatsu 1, Full Rolling and Part Rolling, the
width of the rollers can be adjusted in 3 steps (narrow, medium and wide).
Speed Adjustment
During Kneading, Knead & Tap, and Tapping 1, the speed of action can be
adjusted in 3 steps.
Various Adjustments
Roller Push-Out Adjustment
(Massage Intensity Adjustment)
See P20
Caution
●
Keep massage sessions to no more than 15 minutes in length. Do not exceed five minutes for area specific massage of
any particular part of the body.
→
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired effect,
or even injury. The total amount of time for a daily massage should be limited to about 30 minutes keeping appropriate intervals
between each massage session.
[MA
N
U
A
L S
EL
EC
TIO
N
]
Roller Position Adjustment
Buttons and
Indicators
Description
●
When full rolling is selected:
Changes between up and down
▲
When pressed during a down movement, changes
to up.
▼
When pressed during an up movement, changes to
down.
●
When partial rolling is selected:
The center position of the range of partial rolling can be
adjusted.
●
When rolling is not selected:
The roller position can be adjusted to the area that you want to
massage.
▲
The rollers move up while this button is pressed.
▼
The rollers move down while this button is pressed.
The position at which you release the button becomes the
center of the operation.
●
When up (or down) is selected when the roller is already at the highest (or lowest)
position, a warning alarm sounds.
Caution!
If neither a basic operation nor rolling has been selected, there will be no
operation even if you press a ROLLER button.