— 13 —
3) Weights —
Although the U-Step II is very stable, we do offer weights as an
accessory to increase the
stability of the walker.
These weights easily
secure to the base of the
U-Step II using Velcro
straps
.
Alternative Brake Accessory Installation
instructions below:
a. Loosen the height adjustment bolts on the left and right
side with the 13-millimeter wrench supplied.
b. Carefully insert
the ends of the brake
accessory into the rear
of each handlebar until
the push pin engages
in the holes on the
walker.
c. Adjust the height of the handlebars so that the horizontal
bar is at a comfortable height for you.
d. Re-tighten the height adjustment bolts.
e. The pull-up rod below should be positioned below the
hand brakes so that when the rod is pulled up the hand brakes
are squeezed.
f. If you use this Alternative Brake setup, you may want to
remove the backrest in front so that you can sit down on your
U-Step II from the front.
Summary of Contents for U-Step II
Page 15: ...My Notes 15...
