manualshive.com logo in svg

In-situ Aqua TROLL 600, Operator'S Manual, Page: 60 / 74

Share
Download
In-situ Aqua TROLL 600 Operator'S Manual Download Page 60

Care and Maintenance

User-Serviceable Parts

Storage

Maintenance Schedule

O-rings

Short-term (less than one week)

Long-term (more than one week)

Sensors

For best results, send the instrument to the manufacturer for factory calibration every 12 to 18 

months.

Lubricate O-rings during 

initial setup. Check and 

replace O-rings if worn, 

damaged, or discolored.

Refer to the sensor cap 

instruction sheet for 

details.

See the sensor 

instruction sheets for 

details about maintaining 

and replacing.

RDO Sensor Cap

Remove the restrictor 

and the end cap.

Put the restrictor on the 

instrument in calibration 

mode.

Remove the sensors and 

wiper.

Dampen the sponge 

inside the pH sensor 

storage cap with 

Storage Solution or pH 

calibration standard.

Replace the caps at both 

ends of the sensor. Use 

electrical tape to seal the 

storage cap.

Thread the restrictor 

onto the sonde.

Thread the restrictor 

onto the sonde and 

store.

Pour 15 mL (5 oz) of clean 

water into the restrictor 

and replace the cap.

60

1-970-498-1500

www.in-situ.com

Summary of Contents for Aqua TROLL 600











































































Reviews:

No comments