The controller has 5 maps. Map 1 is set to the «summer» mode, and map 2 is set
to the «winter» mode. All
map
s can be customized. Each setting consists of 5
options and 5 maps.
Options:
џ
DCCD Restraint Set
has two values MAX (%) and MIN (%), sets the limit DCCD
lock. For example, if MIN = 10 and MAX = 60 are specified, DCCD will not
unlocked by less than 10% and locked by more than 60% for any resulting data.
џ
Brake DCCD Set
has a parameter (%), for manual brakes. This value allows you
to set the level of the lock when the hand brake is applied.
џ
DCCD Control Dial
– has two parameters MIN (val) and MAX(val), allows you to
increase or decrease the resulting value using the DCCD wheel. For example,
you activate and configure the DCCD Control Dial function by setting MIN = -50
and MAX = 50. The value from -50 to 50 will be added to the result of the work
on the maps, depending on the position of the DCCD wheel. That is, without
changing the map settings in general, you can change the resulting value within
certain limits. You need to be careful when you activate this option and always
remember which settings it is active.
џ
Left-foot Braking
activates the Left-Foot Parking Map. It requires the setting of
the throttle opening border TPS over (%), which will exceed the value of
processing on the Left-Foot Parking Map.
џ
Sure start
activates when the car is completely stopped and blocks DCCD
slightly when starting. This gives a good start on slippery road surfaces.
MAP SETTING
SETTING
,
page2
Options
Maps
If you have any questions, please write to
