ASSEMBLE THE SIGNALS
It is not allowed to connect the signal ground to the common ground of the
vehicle, this may disrupt the correct operation of the controller. If it is not possible
to use signal ground, for example, when connecting the "+" and "-" buttons on the
steering wheel, use the ground of the car.
INSTALLATION
, page 2
If you have any questions, please write to
Pin Function
Type
Specifications
1 Signal ground
output
2 Button "-"
Input
contact normally open with a short to ground
3 Button "+"
Input
contact normally open with a short to ground
4 Indicator AUTO
output
5 Indicator UNLOCK
output
6 Indicator 1
output
7 Indicator 2
output
8 Indicator 3
output
9 Indicator 4
output
10 Indicator LOCK
output
11 Throttle Position (sensor) Input
analog signal with amplitude 0-5V
12 Speed sensor
Input
pulses with an amplitude of 0-5V
13 RPM
Input
pulses with an amplitude of 0-5V
14 Handbrake signal
Input
0 to 12V
15 Brake signal
Input
0 to 12V
16 Signal button AUTO
Input
Optional, not included. You can replace it with
any button without fixing with normally open
contacts, or purchase the original 83245FE041
17 Signal ground
output
18 Signal ground
output
19 Signal wheel DCCD
Input
Optional, not included. You can replace it with
any variable resistor with a rating of 5kΩ-20kΩ,
or purchase the original 83243FA050
20 "+" wheel DCCD
output 5V
1 2 3 4 5 6 7 8 9 10
1112
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
