IMV CardVibro Air2, User Manual

Page: 9 / 52

WiFi Portable Vibrometer
VM-2012 Air2
9/52
3-1. Power Button
Press the power button to turn on the device. When it is on, the LED is on.
Press the power button to turn off the device. When it is off, the LED is off.
When the device is on, WiFi goes standby and be ready to be connected.
3-2. LED Indicator
Below shows the meaning of LED indications:
Color Light Device
Red ●
Blinking Connection Standby/Complete Charging
On Error
Orange ●
Blinking Shutting Down or USB Connecting
On USB Connected
Green ●
Blinking Wi-Fi Connecting
On Wi-Fi Connected
Red & Orange ● ● Blinking Charging
3-3. USB Outlet
Loosen two screws and slide the cover counterclockwise to open. You can connect a micro USB cable for
charging or vibration measurement with wired connection.
With the USB cover open, you may fail to attain waterproof effects.
3-4. Battery
Use a Philips screwdriver to loosen two screws to open the cover in order to replace batteries. Only AAA
rechargeable batteries can be used in the Air2. Do not use non-rechargeable batteries.
3-5. Strap Mount
You can attach a strap to the device.
3-6. Vibration Sensor
Fix the sensor to the area where you want to measure the vibration. For direct measurement, screw the
standard probe in the socket at the tip of the sensor. You may screw the magnet in the socket for
hands-free measurement.
3-7. Socket (M6 Thread)
Air2 standard model has an M6 thread. The probe or the optional magnet that can be secured in position
with an M6 screw.
3-8. Sensor Connector
You can use the external pickup by connecting it to the Air2 connector model.