IMV CardVibro Air2, User Manual

Page: 28 / 52

WiFi Portable Vibrometer
VM-2012 Air2
28/52
6-4. USB Connection
You can use USB Interface for measuring after the application version 2.6.0. If you want to get the data
through USB interface, you have to use “ USB Host Cable “ for a Tablet. But that’s’ all.
Connect a Tablet to Air2 device through USB Host Cable.
Air2 application shows [ Air-II(USB) ] on the “Air2 device window”.
Press the “connect” button.
The preparation has been finished by only above procedure. The operation of measurement is as
same as a wireless measurement.
But keep in your mind that,
It takes much time to measure by USB port at first time, because Air2 have to translate from
wireless to wired operation protocol.
After second measurement, it will take much same time as wireless measurement,
without shutdown application or remove USB cable.