MDrive17Plus Microstepping
REV060208
5
Line Count
100 200 250 256 400 500 512 800 1000
Differential part#
EAM EBM ECM EWM EDM EHM EXM
EFM
EJM
CONNECTING
QuickStart Kit
For rapid design verifi cation, all-inclusive QuickStart Kits have com-
munication converter, prototype development cable(s), instructions
and CD for MDrivePlus initial functional setup and system testing.
Communication Converters
Electrically isolated, in-line con vert ers pre-wired with mating connec-
tors to conveniently set/program communication parameters for a
single MDrivePlus via a PC's USB port. Length 12.0' (3.6m).
Mates to connector:
10-Pin
IDC
............................................MD-CC300-001
12-Pin Wire Crimp .................................MD-CC303-001
19-Pin M23 (sealed version) ......................... MD-CC301-001
Prototype Development Cables
Speed test/development with pre-wired mating connectors that have
fl ying leads other end. Length 10.0' (3.0m).
Mates to connector:
12-Pin Wire Crimp .................................PD12-1434-FL3
For IP65 sealed versions, single-ended cordsets are PVC jacketed
with foil shield and unconnected drain wire. Length 13.0' (4.0m).
19-Pin
M23
Straight
Termination
..........................MD-CS100-000
Right Angle Termination......................MD-CS101-000
Mating Connector Kits
Use to build your own cables. Kit contains 5 mating shells with pins.
Cable not supplied. Manufacturer's crimp tool recommended.
Mates to connector:
12-Pin Wire Crimp .................................CK-03
Kit contains 5 mating connectors that press fi t onto ribbon cable.
Cable not supplied.
10-Pin
IDC
............................................CK-01
ORDER INFORMATION — MDrive17Plus Microstepping
OPTIONS
Linear Actuator**
The MDrive17Plus is offered with numerous linear actuator
styles and options to satisfy a broad range of linear motion
applications. Contact the factory for details or see:
www.imshome.com/mdriveplus_linear_actuator.html
External Encoder
‡
External optical encoders, single-end or differential, are of-
fered factory-mounted with the MDrive17Plus. All encoders
come with an index mark. Refer to the table below.
Optional encoder cables are available. Order separately.
Single-end Cable (12.0"/30.5cm) ......... ES-CABLE-2
Differential Locking Cable (6.0'/1.8mm) ... ED-CABLE-6
Internal Encoder
Internal differential magnetic encoders with index mark are
available with regular and IP65 sealed versions.
An optional encoder cable, mating to the regular version's 10-
pin wire crimp connector, is available. Order separately.
Internal Encoder Cable (6.0'/1.8mm) ... ED-CABLE-JST10
Control Knob
‡
The MDrive17Plus is available with a factory-mounted rear
control knob for manual shaft positioning.
Planetary Gearbox
Effi cient, low maintenance planetary gearboxes are
offered assembled with the MDrive17Plus. Refer to
details and part numbers on the back cover.
Linear Slide
Integrated linear slides are available factory installed for
precision linear movement. Screw leads are 0.1", 0.2", 0.5"
or 1.0" of travel per rev. Slides are 12.0" (30.5cm) to 36.0"
(91.44cm) long. Contact factory for custom lengths. Refer
to separate datasheet or web site for complete details.
PART NUMBERING
CONNECTIVITY
OPTIONS
(inches/rev)
A = 0.10” (2.54mm)
B = 0.20” (5.08mm)
C = 0.50” (12.7mm)
D = 1.00” (25.4mm)
–R
Screw Lead
Standard Screw Lengths
10", 12", 15", 18", 24" or 36"
For Custom Lengths, Consult Factory
Linear
Slide
Example:
MDM1PSD17A4–
RA10
adds a Linear Slide with
0.10" screw lead, 10" long to example #1.
NOTE: 10" lengths only with A or B leads.
15" lengths only with A, B or C leads.
36" lengths only with D leads.
–N
–E
Internal
Encoder
Control
Knob
Example:
MDM1PSD17A4–ECM
adds an internal 250-line count
differential magnetic encoder with index mark to example #1.
Example:
MDM1PSD17A4–N a
dds a rear control knob for manual
positioning to example #1.
Not available with sealed –65 versions.
–G
Planetary
Gearbox
Example:
MDM1PSD17A4–G1A2
adds a 1-stage planetary gearbox
with 5.18:1 ratio to example #1. Add –F for optional NEMA flange.
Refer to gearbox page for complete
table of ratios and part numbers.
– F
Optional NEMA Flange
Refer to internal encoder table above for line counts and part numbers.
MDM S
17 4 –
Example #1:
Part Number
MDM1PSD17A4
is an MDrive17Plus Microstepping
with pluggable I/O & power interface, SPI communications with 10-pin IDC
connector, and NEMA 17 single length motor.
OPTION
Plus
base version
P2: Communications
D = SPI with 10-Pin IDC Connector
Z = None. Used with 12-Pin Locking Wire
Crimp in Position P1, which includes
Communications.
–E
External
Encoder
OPTIONS
Example:
MDM1PSD17A4–EHL
adds an external 500-line count
differential optical encoder with index mark to example #1.
Not available with sealed –65 versions.
Refer to external encoder table above for line counts and part numbers.
MDM2MSZ17 4 –
Example #2:
Part Number
MDM2MSZ17B4
is an MDrive17Plus-65 Microstepping
sealed with IP65 rating, 19-pin M23 I/O, power and communications circular
connector, and NEMA 17 double length motor.
OPTION
P1: I/O, Power & Communications
19-Pin M23 Circular Connector
For complete product specifications, see:
www.imshome.com/mdriveplus_linear_actuator.html
–L
Linear
Actuator**
Motor
A = Single Length
& Linear Actuator**
B = Double Length
C = Triple Length
Input Version
1 = Universal
5 = Differential
P1: I/O & Power
F = 12" Flying Leads
P = Pluggable Clamp
Type
Terminal
Strip
C = 12-Pin Locking Wire Crimp
(Includes I/O, Power & Comm)
Not available with Differential
Input
Version
Motor
A = Single Length
B = Double Length
C = Triple Length
**Consult Factory for Availability.
QuickStart Kit
details above
Plus
2
-65
IP65 sealed
K
QuickStart Kit
details above
K
** Consult Factory for Availability.
‡ Not Available with Sealed –65 Versions.
Connectivity details: www.imshome.com/cables_cordsets.html
new
new
new
Line Count
100 200 250 256 400 500 512 1000 1024
Single-End part#
E1
E2
E3
EP
E4
E5
EQ
E6
ER
Differential part#
EAL EBL ECL EWL EDL EHL EXL
EJL
EYL
