IMS FPi4000 Operation Manual Download

Page: 30 / 58

4.4

Edit Job

In this function it is possible to edit and change a
programmed job.

1. After pressing the

in the Jobs

menu (refer to “Job Menu” on page 21), the
display will show the job information about the
presently selected job.

2. Press

to select a higher or lower job

number.

3. Press

to confirm the selected job number

and to go to the following screen

or press

to return to the previous screen.

4. After pressing

, the job settings screen for the selected job will be displayed.

All buttons of this screen are described in chapter “Create Job” on page 23.

4.5

Copy Job

1. After pressing the

in the Jobs

menu (refer to “Job Menu” on page 21), the
screen will show the Copy Job screen.

2. Use

to select the job to copy from.

Press

for more information on the

selected job (refer to “Job Information” on
page 22).

3. Use

to select a free job number to

copy to.
A warning will be displayed when no more free job numbers are available.

4. Press

to confirm the selected job numbers and to make a copy or press

to return to the previous screen.

JOB 1

C6/5

108/216

Select job

ESCAPE

EDIT JOB

Edit job

ESCAPE

JOB 1

Copy to job

Copy from job

ESCAPE

COPY JOB

Copy job

ESCAPE

Summary of Contents for FPi4000



























































Search results

Summary of Contents for FPi4000

Reviews:

Related manuals for FPi4000

Brands by name

Popular brands

IMS FPi4000, Operation Manual

Search results

Summary of Contents for FPi4000

Reviews:

Related manuals for FPi4000

Brands by name

Popular brands