manualshive.com logo in svg

IMS FPi4000, Operation Manual

Share
Download
IMS FPi4000 Operation Manual Download Page 13

13

ENGLIS

H

3.5

Loading Envelopes

Adjusting Side Guides

Adjust side guides 

C

 by rotating thumbwheel

D

, so 

that the envelopes:

- fit exactly between the side guides.

- can move freely.

NOTE

If the distance between the side guides is too large, 
the envelopes will twist sidewards, when transported 
into the machine.

Envelope Separation

1. Turn knob 

A

 counterclockwise as far as possible.

2. Slide an envelope (with closed flap) between the rollers in the machine and turn knob 

A

 clockwise until a slight resistance is felt when moving the envelope in and out of the 

machine.
When the resistance is too high, turn knob 

A

 counterclockwise, until only a slight 

resistance is felt.

Feeding Envelopes

1. Place the bottom envelope between the rollers 

(flap down and trailing - bottom side of envelope 
pointing to machine).

2. Loosen the stack of envelopes and place the 

stack on top of the bottom envelope.

3. Shift envelope support 

B

 in or out, so that the 

flap side of the envelope is lifted approximately 
20 mm (0.8”).
Turn envelope support 

B

 so the weight of the 

envelopes is distributed evenly on both sides.

D

C

A

B

C

Summary of Contents for FPi4000



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands