9
6) Put the measuring cup on the base plate below the steam nozzle; put the stainless steel
basket on the measuring cup. Make sure all loose parts are securely in place.
7) Plug in unit. The power butt on will begin to fl ash. Press the power on/off butt on once to
power on unit. The on/off butt on will stop fl ashing.
TO USE THE ULTRASONIC CLEANER
NOTE: It is recommended that another high watt age appliance is not operated on the
same circuit to avoid a circuit overload.
WARNING: Never run the ultrasonic reservoir without water.
1)
Place the jewelry or accessories into the ultrasonic reservoir.
2) Press the ultrasonic butt on“
” on the control panel to turn on.
3) Ultrasonic will shut off aft er 5 minutes automati cally with beep indicator. You can shut
off the ultrasonic functi on if 5 minutes is not required by pressing the ultrasonic butt on
a second ti me.
4) Items that are very dirty should be cleaned fi rst in the ultrasonic reservoir and then
with the steamer.
5) While waiti ng for the ultrasonic cleaning, press the steam on/off butt on for heati ng.
After ultrasonic cleaning is done, using the tweezers, remove the jewelry from the
ultrasonic reservoir and put them in the stainless steel basket. You may also hold the
jewelry by using the tweezers during steam cleaning.
TO USE THE STEAMER
WARNING:
Never
run the steamer without water.
1) Press the steam on/off butt on“
” allowing the steam pressure to build-up.
2) The steamer may be used as soon as the steam-ready light has turned RED.