For contact information, visit www.improvedracing.com
6
Lubricate O-rings prior to installation to prevent damage and ensure a
leak-free seal.
Use aluminum tools to avoid damaging the aluminum fittings.
PORT IDENTIFICATION
Note the port identification and directions of flow illustrated in Figure 2
below.
There are two
1
/
4
”-18 NPT ports for the factory pressure sender or turbo oil
supply lines. There is one
1
/
8
”-27 NPT port for aftermarket sensors. Any
unused ports must be plugged with the included NPT plugs.
IN FROM
FILTER / COOLER
CONNECT THIS PORT TO
THE OUTLET OF THE FILTER
OR OIL COOLER
OUT TO FILTER
CONNECT THIS PORT
TO THE INLET OF THE
OIL FILTER
1
/
4
NPT
PORTS
ACCEPTS OEM
PRESSURE SENDER
1
/
8
NPT
PORT
AFTERMARKET
SENSORS
Figure 2 -
Port Descriptions
