Impex MARCY PLATINUM MP-3500, Owner'S Manual, Page: 26 / 31

STEP 10 (See Diagram 10)
A.) Attach one end of 75” Hip-Thigh Cable (#39) to the bracket on the Rotating Cam Plate (#32).
Secure it with one M10 x 1” Allen Bolt (#102), two Ø ¾” Washers (#111), and one M10 Aircraft
Nut (#109).
B.) Attach two Medium Pulleys (#87) to the pulley bracket on the Leg Machine Frame (#31). Attach a
Double Pulley Bracket (#101) to the two Large Pulleys. Align the holes and secure them with two
M10 x 1 ¾” Allen Bolts (#99), four Ø ¾” Washers (#111), and two M10 Aircraft Nuts (#109).
C.) Draw the Cable between the two Large Pulleys and downward to the opening on the bottom of
the Frame. Attach a Pulley (#44) to the opening. Secure Pulley to the opening with one M10 x 3
3/8” Allen Bolt (#97), two Pulley Bushings (#53), and one M10 Aircraft Nut (#109).
D.) Draw the Cable underneath the Pulley to the open bracket behind the Frame. Install a Pulley with
one M10 x 1 ¾” Allen Bolt (#99), two Ø ¾” Washers (#111), and one M10 Aircraft Nut (#109).
E.) Draw the Cable around the Pulley then upward to the Single Floating Pulley Bracket (#18)
previously installed in Step-7. Secure the end of Cable to the bracket with M10 x 1” Allen Bolt
(#102), two Ø ¾” Washers (#111), and one M10 Aircraft Nut (#109).
25