STEP 2 (See Diagram 2)
A.) Attach the Weight Glide Post (#4) onto the Weight Glide Base (#5). Secure it with four M10 x
¾” Carriage Bolts (#92), ؾ” Washers (#101), and M10 Aircraft Nuts (#98). DO NOT tighten
all the Nuts and Bolts yet.
B.) Slide the Sliding Weight Post (#15) onto the Weight Glide Post (#4). Attach two Olympic
Sleeves (#48) to the Posts. Attach a Spring Clip (#50) to each Sleeve.
C.) Attach the rear of Upper Frame (#2) to the Weight Glide Post (#4). Secure it with one 3 1/8” x
1 ¾” Bracket (#27), M10 x 2 3/8” Allen Bolt (#86), Ø ¾” Washer (#101) to the upper hole.
Secure the lower hole with one M10 x 2 ½” Carriage Bolt (#91), Ø ¾” Washer (#101), and
M10 Aircraft Nut (#98).
D.) Secure the Upper Frame (#2) to the Rear Vertical Frame (#3) with two M10 x 2 ¾” Carriage
Bolts (#90), one 4¾”x2” Bracket (#25), two ؾ” Washers (#101) and M10 Aircraft Nuts (#98).
E.) Secure the Upper Frame to the Front Top Beam with two M10 x 2 ½” Carriage Bolts (#91),
one 4 3/8” x 1 ¾” Bracket (#26), two Ø ¾” Washers (#101), and two M10 Aircraft Nuts (#98).
F.) Securely tighten all Nuts and Bolts previously installed.
8
Summary of Contents for MARCY PLATINUM MP-3100
