Impex MARCY PLATINUM MP-3100, Owner'S Manual

Page: 8 / 24

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
It is recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Left & Right Base Frames (#7 & 8) to the Rear Vertical Frame (#3). Align the holes
and secure with two M10 x 2 ½” Carriage Bolts (#91), Ø ¾” Washers (#101), and M10 Aircraft
Nuts (#98). DO NOT tighten all the Nuts and Bolts yet.
B.) Attach the Weight Glide Base (#5) to the Rear Vertical Frame. Align the holes and secure
with two M10 x 2 ¾” Carriage Bolts (#90), ؾ” Washers (#101), and M10 Aircraft Nuts (#98).
C.) Slide two Lower Safety Frames (#12) onto the Front Vertical Beams (#1). Use a M18 Lock
Knob (#52) to lock each Safety Frame at selected slot.
D.) Attach one Front Vertical Beam (#1) to the Right Base Frame (#8). Secure it with two M10 x 2
¾” Carriage Bolts (#90), one 4 ¾” x 2” Bracket (#25), two Ø ¾” Washers (#101), and two M10
Aircraft Nuts (#98). Repeat the same step to install the other Front Vertical Beam.
E.) Attach the Front Top Beam (#6) to the Front Vertical Beams. Secure each end with two M10
x 2 ¾” Carriage Bolts (#90), one 4 ¾” x 2” Bracket (#25), two Ø ¾” Washers (#101), and two
M10 Aircraft Nuts (#98).
7