Impex MARCY PLATINUM MP-3100, Owner'S Manual

Page: 14 / 24

STEP 6 (See Diagram 6 & Cable Loop Diagram)
A.) Attach one end of the 79” Butterfly Cable (#39) to the hook on the Left Butterfly
(#14). Draw the Cable to the left open bracket on the Butterfly Pulley Support (#11).
B.) Attach a Pulley to the bracket and secure it with one M10 x 1 ¾” Allen Bolt (#88),
two Ø ¾” Washers (#101), and one M10 Aircraft Nut (#98).
C.) Draw the Cable around the Pulley then downward. Attach the Cable to a Single
Floating Pulley Bracket (#21). Repeat the procedure B above to install a Pulley.
D.) Draw the Cable upward to the right open bracket on the Butterfly Pulley Support.
Repeat procedure B above to install a Pulley.
E.) Draw the Cable over the Pulley then clip to the Right Butterfly (#13).
DIAGRAM 6
13