Impex MARCY PLATINUM MP-2500, Owner'S Manual

Page: 25 / 31

Step 11 (See Diagram 11-1, 11-2, 11-3, 11-4, & Front Press Cable Loop Diagram)
A.) Attach the 121” Front Press Cable (#39) to the small tube on the bottom right side of
the Vertical Frame (#5). Align the holes then insert a M10 x 5 ½” Allen Bolt (#79)
through a Ø ¾” Washer (#93) into the Cable head and the Vertical Frame. (See
Diagram 11-1).
B.) Draw the Cable to the Left Front Press (#8). Attach a Pulley (#65) to the Cable.
Align the holes then secure the Pulley with one M10 x 1 ¾” Allen Bolt (#82), one
Pulley Cover (#24), one L-shaped Cable Retainer (#25), two Ø ¾” Washers (#93),
and one M10 Aircraft Nut (#92).
C.) Draw the Cable around the Pulley to the open bracket on the Vertical Frame. Attach
a Large Pulley (#69) to the bracket. (See Diagram 11-2).
D.) Secure the Pulley to the bracket with one M10 x 1 ¾” Allen Bolt (#82), two Ø ¾”
Washers (#93), and one M10 Aircraft Nut (#92).
E.) Draw the Cable around the Pulley to the hole on the Right Front Press (#7). Repeat
Procedure B above to install a Pulley. (See Diagram 11-3).
F.) Draw the Cable around the Pulley to the open bracket on the bottom left side of
Vertical Frame. Secure the Pulley to the Bolt installed in Procedure A above.
Secure it with one Ø ¾” Washer (#93) and one M10 Aircraft Nut (#92). (See
Diagram 11-4).
G.) Draw the Cable underneath the Pulley and upward to the Angled Double Floating
Pulley Bracket (#22) previously installed in Step-9. Repeat Procedure D to install a
Pulley.
H.) Draw the Cable around the Pulley then downward to the open bracket on the Main
Base Frame (#1). Repeat Procedure D to install a Pulley.
I.) Draw the Cable underneath the Pulley then upward to the Single Floating Pulley
Bracket (#30) previously installed in Step-10. Secure the end of the Cable to the
Bracket with M10 x 1” Allen Bolt (#84), two Ø ¾” Washers (#93), and one M10
Aircraft Nut (#92).
24