Impex MARCY PLATINUM MP-2500, Owner'S Manual

Page: 16 / 31

STEP 8 (See Diagram 8 & Upper Cable Loop Diagram)
A.) Attach the 108” Upper Cable (#38) to the opening on the front of Upper Frame (#15).
Make sure the ball stopper is underneath the Frame. Attach a Pulley (#65) to the Cable.
B.) Secure the Pulley to the opening with one M10 x 3 3/8” Allen Bolt (#83), two Ø 7/8” x 1”
Pulley Bushings (#55), and one M10 Aircraft Nut (#92).
C.) Draw the Cable over the Pulley along the Upper Frame towards the back of the
machine to the opening in the middle of Upper Frame. Repeat Procedure B above to
install a Pulley.
D.) Draw the Cable around the Pulley then downward. Attach a Pulley to the top hole on
the Double Floating Pulley Brackets (#21). Secure a Pulley to the brackets with one
M10 x 1 ¾” Allen Bolt (#82), two Ø ¾” Washers (#93), and one M10 Aircraft Nut (#92).
Let the Bracket hanging for now.
E.) Draw the Cable around the Pulley then upward to the open bracket between the two
Guide Rods. Repeat Procedure E above to install a Pulley.
F.) Draw the Cable around the Pulley then downward to the Selector Rod (#17). Securely
thread the Head Bolt at end of the Cable into the Selector Rod.
G.) Connect the Lat Bar (#16) to the Cable with two Hooks (#78) and one Short Chain
(#75).
DIAGRAM 8
15