Impex MARCY PLATINUM MP-2500, Owner'S Manual

Page: 12 / 31

STEP 4 (See Diagram 4)
A.) Attach the Butterfly Pulley Bracket (#19) to the Vertical Frame (#5). Secure it with one M10
x 3 ½” Allen Bolt (#80), two Ø ¾” Washers (#93), and one M10 Aircraft Nut (#92).
B.) Attach two Swivel Pulley Brackets (#10) to the Butterfly Pulley Bracket. Secure each Swivel
Pulley Bracket with one M10 x 2 ½” Allen Bolt (#81), two Ø ¾” Washers (#93), and one
M10 Aircraft Nut (#92).
C.) Attach the Backrest Board (#43) to the Vertical Frame. Secure it with two M8 x 2 ½” Allen
Bolts (#87) and two Ø 5/8” Washers (#94).
D.) Attach the Leg Developer (#6) to the open bracket on the Seat Support Frame (#4). Secure
it with a Leg Developer Axle (#58), two Ø ¾” Washers (#93), and two M10 x ¾” Allen Bolts
(#85).
E.) Insert a Foam Tube (#32) halfway through the holes on the Leg Developer. Push two
Foam Rolls (#50) onto the Foam Tube from both ends. Plug two Foam Roll End Caps
(#48) into the ends of the Tube.
11