STEP 4 (See Diagram 4)
A.) Connect the Upper Pulse Sensor Wire (#28) from the Main Frame to the Pulse Sensor
Cord (#29). Connect the Pulse Sensor Cord to the Lower Pulse Sensor Wire (#30) on the
Seat Sliding Frame (#16).
B.) Attach the front of Seat Support (#15) to the Main Frame. Secure it with four M8 x 5/8”
Allen Bolts (#11), two Ø 5/8” Washers (#12), and two Rubber Stoppers (#31).
C.) Attach the rear of Seat Support to the Rear Support (#14). Secure it with two M8 x 5/8”
Allen Bolts (#11) and Ø 5/8” Washers (#12).
DIAGRAM 4
9
