STEP 2 (See Diagram 2)
A.) Attach the Computer Post (#4) to the Main Frame (#1). Connect the Middle Computer
Sensor Wire (#24) to the Lower Computer Sensor Wire (#25).
B.) Connect the Upper Pulse Sensor Wire (#27) to the Middle Pulse Sensor Wire (#28).
C.) Connect the Upper Tension Connector (#23) to the bracket on the Lower Tension
Connector (#26).
See HOW TO
CONNECT TENSION CONNECTOR on next page
.
The exercise tension can be adjusted by using the Tension Adjustment Knob on the
Front Post.
D.) Insert the Computer Post into the open bracket on the Main Frame. Secure it with
three M8 x 5/8” Allen Bolts (#11) and Ø 7/8” Bent Washers (#13). Close the opening
with two Plastic Covers (#36 & #37).
E.) Connect the Middle Computer Sensor Wire (#24) and Upper Pulse Sensor Wire (#27)
to the back of the Computer (#6). Hide the wires inside the tube. Attach the Computer
to the Computer Post. Secure it with four M6 x 3/8” Philips Screws (#10).
F.) Attach the Front Handle (#5) to the Computer Post. Secure it with three M8 x 5/8” Allen
Bolts (#11) and Ø 5/8” Washers (#12).
5