background image

 
 

 
 
TABLE OF CONTENTS 

 

BEFORE YOU BEGIN...................................................................................…. 1 
IMPORTANT SAFETY NOTICES..................................................................…. 2 
HARDWARE IDENTIFIER.....…....................................................................…. 4 
ASSEMBLY INSTRUCTIONS........................................................................…. 5 
EXPLODED DIAGRAM………………………………………………………………. 

10 

PARTS LIST...............................................................................................……. 11 
WARRANTY.................................................................................................…. 12 
ORDERING PARTS.......................................................................................… 12

 

 
 

 
 
 
 
 
BEFORE YOU BEGIN 

 

Thank you for selecting the MARCY CLASSIC MCB-379 Weight Bench by 
IMPEX

®

 INC.  For your safety and benefit, read this manual carefully before 

using the machine.   As a manufacturer, we are committed to provide you 
complete customer satisfaction.  If you have any questions, or find there are 
missing or damaged parts, we guarantee you complete satisfaction through 
direct assistance from our factory.  To avoid unnecessary delays, 

please call 

our TOLL-FREE customer service number.  

Our Customer Service Agents 

will provide immediate assistance to you. 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Summary of Contents for MARCY MCB-379














Reviews: