SMITH MACHINE ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended that two or more people assemble this machine
to avoid possible injury.
STEP 1 (See Diagram 1)
A.)
Note: Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach a Base Frame (#6) to the Left Rear Support (#4). Secure it with two M10 x ¾”
Allen Bolts (#31) and two Ø ¾” Washers (#38). Repeat the same step to install the
other Base Frame to the Right Rear Support (#5).
C.) Connect the Left and Right Rear Support with the Cross Brace (#3). Secure each end
of the Cross Brace to each Rear Support with two M10 x 3 1/8” Carriage Bolts (#30),
one 5 1/8” x 1 5/8” Bracket (#17), two Ø ¾” Washers (#38), and two M10 Aircraft Nuts
(#37).
DIAGRAM 1
5
Summary of Contents for MARCY DIAMOND ELITE SM-1050
Page 8: ...7 ...
Page 11: ...SMITH MACHINE EXPLODED DIAGRAM 10 ...
Page 19: ...BENCH EXPLODED DIAGRAM 18 ...