STEP 4 (See Diagram 4)
A.) Attach the Leg Developer (#6) to Front Post (#2). Secure it with one Axle (#18), two M10 x
5/8” Allen Bolts (#38), and two Ø ¾” Washers (#45).
B.) Insert two Foam Tubes (#11) halfway through the holes on Leg Developer. Push four Foam
Rolls (#16) onto the Tubes from both ends. Plug four Foam Roll End Caps (#26) into the
ends.
C.) Slide an Olympic Sleeve (#21) on the weight post on Leg Developer. Attach a Spring Clip
(#17) to the Sleeve.
D.) Attach the Arm Curl Handle (#10) to the Leg Developer and secure it with a 3” Lock Pin
(#34). Remove Arm Curl Handle when doing Leg Developer exercises.
DIAGRAM 4
17
Summary of Contents for MARCY DIAMOND ELITE SM-1050
Page 8: ...7 ...
Page 11: ...SMITH MACHINE EXPLODED DIAGRAM 10 ...
Page 19: ...BENCH EXPLODED DIAGRAM 18 ...
