STEP 2 (See Diagram 2)
A.) Attach the rear of the Main Seat Support (#25) to the Upright Beam (#9). Secure
it with two M10 x 2 ¾” Allen Bolts (#16), four
∅
¾” Washers (#13), and two M10
Aircraft Nuts (#14). Do not tighten the nuts and bolts yet.
B.) Slide the Sliding Block (#22) onto the Main Seat Support (#25). Secure it with a
Lock Knob (#6).
C.) Attach the Front Stabilizer (#40) to the Main Seat Support. Secure it with three
M10 x 2 ¾” Allen Bolts (#16), six
∅
¾” Washers (#13), and three M10 Aircraft
Nuts (#14).
D.) Insert one Lock Knob (#6) into the hole on the back of Front Stabilizer (#40).
E.) Securely tighten all the nuts and bolts previously installed.
DIAGRAM 2
5
